Results 1 to 4 of 4

Thread: Delta 43-431 or 43-445 HD Shaper

  1. #1
    Join Date
    Apr 2008
    Location
    Mesa, AZ
    Posts
    10

    Delta 43-431 or 43-445 HD Shaper

    Ok, I got one of these shapers some time ago, NO SPINDLE but had the router bit spindle and several collets. Being an old woodworking machine afficianado, I thought Delta would have kept using the tried and true shaper spindles, but no, I find not on these machines. The taper on the spindle is longer. AND wonderfully, Delta has discontinued the 3/4" standard spindle for this machine (Thanks Black and Decker!) SO, does anyone know of any of the imports that use this same taper OR does anyone have a spare 3/4" spindle they want to part with. (doubt it) Otherwise my only other option is to buy the extra long 3/4" spindle and go with that.

    Thanks in advance.
    Marty

  2. #2
    Join Date
    Oct 2005
    Location
    Camas, Wa
    Posts
    3,855
    Go over to the OWWM website and post in the BOYD section. I believe I saw someome making one from scratch or machining one from a Grizzly part. They might make you one for a little bit of dough.

  3. #3
    Join Date
    Apr 2008
    Location
    Mesa, AZ
    Posts
    10
    Thanks, but I don't think that was for the LONG tapered spindles. These are definitely odd balls.....
    Marty

  4. #4
    Join Date
    Apr 2003
    Location
    London, Ontario
    Posts
    302
    Hello there,

    Call this guy,

    http://www.renovoparts.com/

    David.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •