This 24" by 36" exterior sign is still in the works, I still have to fabricate a welded steel hanger.
Another Corian sign but this one has a 1/4" thick acrylic inlay 1/8" deep.
I cut the acrylic letters on my laser engraver and used Dupont adhesive to glue the acrylic letters to the Corian.
I used a black textured Fusion paint, this is the toughest paint I have even seen.
Total time so far - Four Hours.
Same old technique I use on most of these signs:
Route, Paint, Sand and send them the bill
I really enjoy making signs, the best job I ever had......
.