My buddy just got into reloading his own ammo to save money and wanted to build a bench to do so. With my help this is what we came up with.
Laminated yellow pine top. 2x10 from menards "another borg"
Aruco ply for the carcases and drawers.
Scrap red oak for all the trim.
100lb full extension slides.
Dovetailed all the drawers.
stained the oak before applying it and the drawers and carcase. Simple poly finish. about 4 coats on the top, two on the cases.
Not much, simple design, but it fits the bill for what he wanted.