I put the final detailing on the body and got it ready for finish. I hope to start spraying tomorrow...if I can decide what color to go with. In blocking out the top, I opened up a couple of mineral streak around the vent that I think keeps me from going with the vintage amber I had initially decided on.
If I'm crazy, just tell me, but I'm thinking trans black. Trans red is a close, almost in a tie, second place.
Last step, I took a piece of 220 and just ever so slightly eased all of the 90 degree edges. All around the binding, around the neck posket and PU routes. Finish tends to flow over even hard edges and soften their angle but I didn't want to leave this to chance. I like the eased edge because it offers one more surface to catch and reflect light when it's all done. Plus it's a finished look vs a hard edge.