Results 1 to 5 of 5

Thread: Spray Booths

  1. #1
    Join Date
    Jul 2006
    Location
    Central, PA
    Posts
    416

    Spray Booths

    I am looking to build a mobile spray booth. Pics posted and ideas suggested would be appreciated.

    Thanks.

  2. #2
    Join Date
    Jul 2007
    Location
    NE Oklahoma
    Posts
    391
    I made this one from 3/4" PVC & 6 mil plastic from Lowe's using a 20" box fan with furnace filters for exhaust/intake air. I do water-based only -- this is definitely NOT recommended for solvent lacquer (I don't even use it for alcohol-based shellac). I store it on brackets attached to the garage ceiling and just use a tarp for the floor. I purchased the "door" zipper from Lee Valley. Not much to look at but it works for me.
    Attached Images Attached Images
    Last edited by Jim McFarland; 12-12-2009 at 1:11 PM. Reason: typos

  3. #3
    This one is mine, it's a positive pressure booth.
    http://www.dans-hobbies.com/2009/05/...e-spray-booth/
    -Dan

  4. #4
    Join Date
    Apr 2008
    Location
    The Little Tennessee River near Knoxville.
    Posts
    1,227
    Quote Originally Posted by dan sherman View Post
    This one is mine, it's a positive pressure booth.
    http://www.dans-hobbies.com/2009/05/...e-spray-booth/
    How do you prevent the wind from the fans from blowing your spray all over the place?
    Retired, living and cruising full-time on my boat.
    Currently on the Little Tennessee River near Knoxville

  5. #5
    it's mounted high on the one side about 6 feet off the ground, to date I haven't had any issues with blowing the spray around.
    -Dan

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •