Results 1 to 2 of 2

Thread: SCMS/CMS table depth

  1. #1
    Join Date
    Dec 2005
    Location
    Michigan
    Posts
    20

    SCMS/CMS table depth

    I am in the process of building a table and dust collection system for my 12" CMS. I would like to eventually upgrade to a 10" SCMS and was curious how wide everyone made their tables for their SCMS. I know the SCMS will take up more room but I am just not sure how much more. Would I be ok with a 24" table depth or would I need to go 30". I also would rather keep it to 24", or as close as possible, for space. Seen a lot of pictures on the forum but I am not good at visual measurements.

    Thanks for any input.

    Damon

  2. #2
    I have 30" for my Makita LS1013 (this mounts the saw and gives you enough space to clear the saw on a full swing).

    Here's my setup.

    Last edited by Jeff Nolan; 12-24-2009 at 10:34 AM.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •