Results 1 to 4 of 4

Thread: Bench Grinder Sharpening Station Ideas

  1. #1
    Join Date
    Feb 2005
    Location
    Wayne, PA
    Posts
    40

    Bench Grinder Sharpening Station Ideas

    I am in the process of designing a shop in a two car garage. Over the years I have accumualted 1 bench grinder and 2 nice grinder motors. To me this equates to 6 possible wheels, buffers or polishers. I am considering building a 4 sided box with a shaft going through the middle. A single bench grinder would be mounted on each side with one side left open. The grinders could then be rotated until the one I needed was on top, then it could be locked in placed. A nice cabinet for all the grinding/sharpening/buffing/polishing accessories would surround this design.

    If you were to have 6 wheels for woodworking and some metal work, would would you choose? I already have all the sanders I need elsewhere. Anything else you would include in this "ultimate grinding/sharpening/polishing/buffing station? Thanks for any and all advice!! John

  2. #2
    Join Date
    Feb 2005
    Location
    Wayne, PA
    Posts
    40
    Any ideas on this one...I'm hoping to build someting this weekend.

  3. #3
    Join Date
    Dec 2008
    Location
    Pensacola Florida
    Posts
    2,157
    John, I would use
    1 grinding rock
    2 deburing wheel
    3 leather wheel
    4 wire wheel
    5 and 6 buffing wheels
    Dave

    IN GOD WE TRUST
    USN Retired

  4. #4
    Join Date
    Feb 2005
    Location
    Wayne, PA
    Posts
    40
    Thanks for the input, Dave!

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •