Filled up the boiler with water last night and bled all the air out. I ran the pressure up to 45 lbs. Had one small solder joint leak so I drained it, fixed it & refilled / bled the system. Left it over night & still had 45lbs this morning. Now I’ll drain off 15 gallons of water and replace it with RV anti freeze bleed it again and pull the pressure up to 8 lbs or so. I’ve got a little conduit & wire to run to the blowers, & hook up the thermostat. Should be ready to fire up Sunday. Fingers are crossed.

On a side note a friend of mine gave me an old stainless steel milk cooler from a resturant. The kind with the two weighted spouts to pour from. Cleaned it up nice & plugged it in.To my amazement 2 cases of beer just fit, cases and all. Almost freezes the beer but not quite. Looks cool in the shop.