Need help with Autocad 2007, Toolbars missing

[Keith Outten]

Does anyone know how to turn on the tool bars at the top of the screen? Loading a drawing from a vendor turned the tool bars off, there must be a keystroke command to restore the tool bars.

TIA
.

[Guy Mathews]

Keith,

Try pushing Ctrl~0 at the same time.

if that does not do it, this link should help.

Guy

http://www.ellenfinkelstein.com/Auto..._toolbars.html

[Keith Outten]

Guy,

Thanks for the suggestions but neither one worked.
The toolbars disappeared when a Read-Only drawing was loaded.
Now we can't get them back
.

[Dean Rose]

Keith, you should be able to type cui in the command line and that will open the user interface and you can see what is turned off.

[Walter Plummer]

I have not used autocad since version 2004 but try view in the drop down menu and select toolbars. You should be able to turn them on there by checking the box next to the ones you want. Do them one at a time because sometimes they open on top of each other. Let us know if you get it fixed.

[Craig Reynolds]

You should be able to right click on any toolbar to bring up a list of all toolbars and check which ones you want turned on. AutoCad will probaly drop them in the middle of the screen where you can drag and drop them any place you want them whether it's top, bottom, sides, etc.

[James Stokes]

also look down at the right bottom of the screen, Click on the lock, It should open and tell you if toolbars are locked.