Could someone recommend a good T shank Jig Saw blade for cutting curves? I want to use it for making patterns in thin wood. Dewalt or Bosch
Thanks
Johnny
Could someone recommend a good T shank Jig Saw blade for cutting curves? I want to use it for making patterns in thin wood. Dewalt or Bosch
Thanks
Johnny
Last edited by Johnnyy Johnson; 02-28-2010 at 7:32 AM. Reason: SP
This Festool blade chart will give you both Festool and Bosch equivalents for your application. I have used both the S74/4K and S50/1,4K with good results in 3/4" stock.
Festool Jigsaw blade Chart
Bill Esposito
Click on my user name to see the link to My Personal WoodWorking and Tool Review Pages
Bosch T101AO which is the Festool S50/1.4k these are head and shoulders above the rest and you can usually get the Bosch at the Borgs.
Last edited by Van Huskey; 02-28-2010 at 8:55 AM.
I use T244D's for cutting patterns out of 1/4" hardboard or MDF with good result. They are just what I happen to have and I am sure others of a similar profile would do well. I generally cut right to the line on open or sweeping areas and just a bit "fat" on detail areas and file to the line.
"A hen is only an egg's way of making another egg".
– Samuel Butler
hanks Guys..I check on these blades.