has anyone managed to get lasecut 5.3 working with win7,seems win7 will not recognize the dongle and it all quits right there
has anyone managed to get lasecut 5.3 working with win7,seems win7 will not recognize the dongle and it all quits right there
You'll most likely have issues getting it to work with anything beyond XP.
Hi-Tec Designs, LLC -- Owner (and self-proclaimed LED guru )
Trotec 80W Speedy 300 laser w/everything
CAMaster Stinger CNC (25" x 36" x 5")
USCutter 24" LaserPoint Vinyl Cutter
Jet JWBS-18QT-3 18", 3HP bandsaw
Robust Beauty 25"x52" wood lathe w/everything
Jet BD-920W 9"x20" metal lathe
Delta 18-900L 18" drill press
Flame Polisher (ooooh, FIRE!)
Freeware: InkScape, Paint.NET, DoubleCAD XT
Paidware: Wacom Intuos4 (Large), CorelDRAW X5
This is because Microsoft will not let you load any unsigned drivers or software into YOUR computer.
Microsoft started this with vista.
I have real issues with this policy. I should be the one that decides what software or drivers that I want to load into my machine. However, I digress.
[SIGPIC][/SIGPIC]Camaster Cobra 408 working table size 48 x 98
Wincnc,AspireII,PhotoVcarve,Cut3D
HX6090SE 60Wworking table 23”X36”
LaserCut 5.3
Coreldraw X3, photograV 3.0, Photozoom3
Sawmill Creek is financed in part through member contributions.
Many members just like you have found extraordinary value in becoming a financial supporter of SMC.
Hi Stan,
You would need to check on Device Drivers for win7 on the Lasercut website.
Other than that you will be stuck with whatever the last OS was that the dongle was written for.
You may want to read up on VirtualPC 2007. It is a Microsoft system and it is free. During the install it states it will not work on anything lower than Enterprise versions but I have it working fine under Vista Home and also XP Home. Ignore the warnings and proceed with the install.
Once you have that running, install an older operating system within the virtual PC, then install Lasercut and the dongle.
Dave J
Forums: Where all too often, logic is the first casualty.
well it really is not a big deal,as lasercut also supports drivers for corel draw 11.12.13 not the newest 14 nad autocad 2000,2004,2006 which again is way back.
Xp actually is fine to use ,i like win7 it seems to act like a mature xp pro but i went back to xp pro and everyhting is running fine ,wireless under win7 is the only thing i miss as its more sensitivre and i get a better signal strength.
My cnc router runs under xp pro ,i guess if its working leave it alone
Hi James,
You might want to check this site...
http://www.techspot.com/vb/all/windo...ista7-x64.html
Also google the following for some alternatives.
windows unsigned drivers
Dave J
Forums: Where all too often, logic is the first casualty.
Hi all
Know this an old thread and my be answered elsewhere. I am new to laser cutting/engraving, just alignment mirrors and cut my first mdf letter.
Anyway l installed Laser cut 5.3 on win7, it's not the OS, the drivers are 32 bit only. So win7 32 bit works, 64 bit will not. I have a CNC router as well and its the same sort of thing.
Hope this helps someone
Cheers Bob
I Have win 7 64bit and lasercut 5.3 and it works just fine
If the Help and advice you received here was of any VALUE to you PLEASE! Become a Contributor
Rabbit RL_XX_6040-60 watt Laser engraving/cutting machine Oh wait its a 3D Printer my bad LOL
Lasercut 5.3
CorelDraw X5
10" Miter Saw with slide
10" Table Saw
8" bench mount 5 speed Drill Press
Dremel, 3x21 Belt Sander
I'm running Lasercut 5.3 on Windows 8.1 with 64 bit and I have no problems.
G. Weike 60 watt 1630 Laser Engraver
G. Weike 130 watt 2436 Laser Cutter
Lucas 618 Sawmill
Solar Kiln
Nyle L200 DH Kiln
Woodworking Shop
I'm running Lasercut 5.3 on three computers, all Win 7, with two being 64 bit and one being 32 bit. Vista was a long fight that I lost...grrrr.
60w EFI 6090 & 100w Z4 Reci 6090 G Weike Lasers, 4 X 4 CNC Router
CLTT using Oki C822dn & Adkins Press
Glass Sandblasting, Woodwork Shop, etc...
V Carve Pro v8 & Photo V Carve, Lasercut 5.3, Corel Draw 2017 on Windows 7 and iMac (via Parallels), etc
I'm running win7 64 bit i had to find a driver and i also had to set permission for lasercutif you need the driver send me a email address
Cheers Coxy
Hey
It should work no Problem I have mine working on windows 8.1 and seems fine, 😄