I'm short enough on floor space.... not sure that'll work for me, but an interesting idea!

Jason

Quote Originally Posted by John Seiffer View Post
I built a dust cannon. It's basically a piece of 4" pvc on an arm that swivels and raises to any angle. One end is attached to a hose to my dust collector and the other is aimed at wherever I want to suck dust from. I can position it right up on the table of my drill press.

I can't find the pix I found of the original idea but here's a sketch I did when designing it. What is doesn't show is that I put casters on the bottom to move it around, and the ends of the pipe stick out a bit beyond the board they're mounted on. That makes it easier to hook up the hose, or to put an angle on the front.

Also not shown are the T-Track and knobs to make it easier to raise/lower and swivel.