[OP]
Member
Don't know if this type of post is permissible, but here goes.
I am going to build a communion table for our small church. My work I will just donate. I need to have someone rout the scripture, "This Do In Remembrance of Me" in the table front. Would involve shipping a board somewhere.
Can someone guide me in the right direction as to where to get it done? I can't find someone locally.
Tom
2 Chronicles 7:14
Member
You (or your church) could hire it done on cnczone maybe or maybe look on 100Kgarages for someone local-ish. Lots of good honest church going folks looking for paying work these days. Expect $40-$80 per hour according to a poll on cnczone for cnc router shop work.
Glad its my shop I am responsible for - I only have to make me happy.
Member
We have a new feature here on Sawmill creek called friends of the creek, (red button at the top) it has listings of some creekers that will work for hire. I believe that mike k is on the list and he is located in Texas.Originally Posted by Mike Heidrick
Good luck.
jim j.
[SIGPIC][/SIGPIC]Camaster Cobra 408 working table size 48 x 98
Wincnc,AspireII,PhotoVcarve,Cut3D
HX6090SE 60Wworking table 23”X36”
LaserCut 5.3
Coreldraw X3, photograV 3.0, Photozoom3
Sawmill Creek is financed in part through member contributions.
Many members just like you have found extraordinary value in becoming a financial supporter of SMC.
Friend of the Creek
pay the shipping and wood cost i will do it for free!!
actually send me your wood prepaid return and it is still free
jim mcgrew
Last edited by james mcgrew; 05-04-2010 at 2:14 PM.
Member
Check out 100k garages on the web They are a group of shopboters that dothat sort of thing.
[OP]
Member
Thanks, Jim.
Tom
Tom
2 Chronicles 7:14
Friend of the Creek
it would be an honor to help!! liturgical work has been very good to me
jim
Posting Permissions
Reply With Quote