Page 1 of 2 12 LastLast
Results 1 to 15 of 17

Thread: Best glue for granite to wood

  1. #1

    Best glue for granite to wood

    Hi all, its been a while since I posted anything but I have been keeping tabs on the forum. My question is that I have just made a memorial plaque for a cusomer that is 11" 8" black granite tile and I need to glue it to a black painted wood base for hanging on a wall.

    any suggestions on the best glue? I thought of liquid nails or an epoxy

    Ron.....
    Accuris 14 30 W, Engravelab 7, CorelDraw X4, Photograv 3, Gravotech 3000 plotter

  2. #2
    Join Date
    Jan 2004
    Location
    Lewiston, Idaho
    Posts
    28,504
    Ron,

    Check out this website: http://www.thistothat.com/

    Sorry...no stone listed there.
    Last edited by Ken Fitzgerald; 05-26-2010 at 12:08 AM.
    Ken

    So much to learn, so little time.....

  3. #3

    Granite to wood glue

    thanks Ken, I will stop in at the tile store tomorrow and see if they have any ideas. I would hate for my customer to get knocked out by a granite tile....
    Accuris 14 30 W, Engravelab 7, CorelDraw X4, Photograv 3, Gravotech 3000 plotter

  4. #4
    Join Date
    Mar 2008
    Location
    Savusavu, Fiji
    Posts
    1,167
    I might worry about how well that black paint is adhering to the wood.
    Longtai 460 with 100 watt EFR, mostly for fun. More power is good!! And a shop with enough wood working tools to make a lot of sawdust. Ex-owner of Shenhui 460-80 and engraving business with 45 watt Epilog Mini18.

  5. #5
    tek7 will do the job - www.tek7.com
    Last edited by Stephen Kane; 05-26-2010 at 5:11 AM.

  6. #6
    Join Date
    Oct 2005
    Location
    Moreton, Wirral, UK
    Posts
    3,287
    A contact adhesive has to be your best bet, where you apply to both sides, allow to touch dry and press together.
    Epilog 45w Helix X3/X5 Corel Microflame Generator (flame polisher) Heat Bender


  7. #7
    Join Date
    Jul 2007
    Location
    Michelmersh, ROMSEY, Hampshire UK
    Posts
    1,020
    Foaming polyurethane glues stick to just about anything and are fully waterproof etc..

    Gorilla Glue and Balkatan are the ones I have used - Balkatan sets much faster (about 25 mins) so is more convenient, but Gorilla is more readily available.

    You might need to mask the front surface to make absolutely sure that the foam can't get onto it by accident

  8. #8
    The newest sensation: uglu

    It's a tape which is advertised to glue unlike things together, they show it being used to glue stone to wood. Worth a try? Only $9.95!(I don't really know that, it's just a common saying...)

    dee

    ps - I never tried it so don't take my word for it
    Epilog Mini 18/25w & 35w, Mac and Vaio, Corel x3, typical art toys, airbrush... I'm a Laserhead, my husband is a Neanderthal - go figure

    Red Coin Mah Jong

  9. #9
    Join Date
    Dec 2008
    Location
    Monroe Twsp NJ
    Posts
    74
    When we had this house built last year, the installer used silicone to install the fireplace surrounds.

    He did say the color might bleed thru, so he used clear on the white marble, and black on the black granite side.

    Of course these are vertical pieces of granite/marble attached to unpainted sheet rock. He said don't touch them for 1 day while the silicone dried. Just held in place with sheetrock nails which I waited 2 days to remove.

    John

  10. #10
    Join Date
    Feb 2007
    Location
    Savannah, GA
    Posts
    4,422
    Silicone caulk will work and shoulld hold very well. It shouldn't really matter with black granite, but I would caution against using things like Liquid Nails with stone. Any petroleum based product has the potential to bleed through stone.

    “Life is not so short but that there is always time enough for courtesy and chivalry.” —Ralph Waldo Emerson

    Everybody knows what to do with the devil but them that has him. My Grandmother
    I had a guardian angel at one time, but my little devil got him drunk, tattooed, and left him penniless at a strip club. I have not had another angel assigned to me yet.
    I didn't change my mind, my mind changed me.
    Bella Terra

  11. #11
    Join Date
    Feb 2007
    Location
    Alabama
    Posts
    2,395
    Look into 3m VHB tapes. (VERY HIGH BOND). These tapes are so strong, they actually use them to manufacture trailers to bond the sides to the frames. I have not used any personally, but an associate that owns a sign company uses them to mount metal signs to masonry and the like. He says the stuff is so strong that the material will break before the bond. Expensive, but apparently worth it. http://www.uline.com/BL_6040/3M-VHB-4950-Foam-Tape
    Also, here is a youtube video about it http://www.youtube.com/watch?v=7OtrDvDvF5I
    Last edited by Larry Bratton; 05-26-2010 at 11:12 AM. Reason: added video
    Epilog Legend EXT36-40watt, Corel X4, Canon iPF8000 44" printer,Photoshop CS6, Ioline plotter, Hotronix Swinger Heat Press, Ricoh GX e3300 Sublimation

  12. #12
    VHB tape is amazing. I've glued many a sign up with that stuff. Glues to brick just fine. The longer it stays, the stronger it gets, but I'd agree with Belinda on this application- silicone. I remove signs frequently. Some mounted to granite as well and the one thing that's common is they were installed using silicone. Typically, I see the cheap foam tape used to hold it in place while the silicone cures. Otherwise, it'll slide off
    Lasers : Trotec Speedy 300 75W, Trotec Speedy 300 80W, Galvo Fiber Laser 20W
    Printers : Mimaki UJF-6042 UV Flatbed Printer , HP Designjet L26500 61" Wide Format Latex Printer, Summa S140-T 48" Vinyl Plotter
    Router : ShopBot 48" x 96" CNC Router Rotary Engravers : (2) Xenetech XOT 16 x 25 Rotary Engravers

    Real name Steve but that name was taken on the forum. Used Middle name. Call me Steve or Scott, doesn't matter.

  13. #13
    Join Date
    May 2009
    Location
    Belo Horizonte, Brazil
    Posts
    88

    Araldite

    very popular here in Brazil
    .
    http://en.wikipedia.org/wiki/Araldite

  14. #14

    Thumbs up Glue Granite to wood

    Thank you all for the imput, I decided to go with the contact cement or a Frank would call it Evostick. It seems to have worked well (time will tell)

    I have attached the result.....

    Ron....
    Attached Images Attached Images
    Accuris 14 30 W, Engravelab 7, CorelDraw X4, Photograv 3, Gravotech 3000 plotter

  15. #15

    Thumbs up Glue Granite to Wood

    Thankyou all for the input, I have decided to go with contact cement.
    attached is the result......
    Accuris 14 30 W, Engravelab 7, CorelDraw X4, Photograv 3, Gravotech 3000 plotter

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •