[OP]
Member
Fairly tight grain, no unusual figure, between 1/16" and 1/8" thick, 4 1/2" in diameter and 1 3/4" high. Too sharp a curve at the top but my wife likes it and that is what matters.
<br>
<img src="http://users2.ev1.net/~henthorn/bowl3a.jpg">
<br>
<img src="http://users2.ev1.net/~henthorn/bowl3b.jpg">
<br>
<img src="http://users2.ev1.net/~henthorn/bowl3c.jpg">
What you do today determines what you can do tomorrow.
Member
Nice shape and finish, Don. Pretty little bottom, on the bowl, on the bowl. No comment on your bottom...
Big Mike
I have done so much with so little for so long I am now qualified to do anything with nothing......
P.S. If you are interested in plans for any project that I post, just put some money in an envelope and mail it to me and I will keep it.
Member
Nice bowl Don, I like to turn small thin bowls to.
Earl
Moderator
Don, you're really cranking them out!! This one is great. The "thinness" really compliments this form, too.
--
The most expensive tool is the one you buy "cheaply" and often...
Member
Yep, very nice curves... here we go talking about nice bottoms and curves......
Scott C. in KC
Befco Designs
Posting Permissions
Reply With Quote