Results 1 to 1 of 1

Thread: Enjoying drilling exotic metals;)

  1. 07-03-2010, 11:00 AM #1
    Khalid Khattak's Avatar
    Khalid Khattak
    Khalid Khattak is offline [OP] Member
    Send a message via MSN to Khalid Khattak
    Join Date
    May 2008
    Location
    Pakistan
    Posts
    310

    Enjoying drilling exotic metals;)

    Hi Guys,
    Been busy in retrofitting a Radial drill machine and now making use of it.. Currently drilling Tubesheet and baffle plates of exchangers..

    Material: SS316
    Material thickness: 30mm
    Drill Material: HSS
    Drill Dia: 8mm and 10mm
    Drill Depth: 34mm and 55mm
    Spindle Speed: 800RPM
    Feed: 1.37 IPM
    Peck Drilling Cycle: G73 and G83

    Here is the Radial drill conversion:
    Go to CNC Zone and search RETROFIT OF RADIAL DRILL MACHINE INTO CNC MILL

    and enjoy the Youtube video
    http://www.youtube.com/watch?v=FH2X_W2MHBY
    Attached Images Attached Images
    Last edited by Bruce Page; 07-03-2010 at 12:35 PM. Reason: • Links to other public or private forums are not allowed per the TOS.
    Reply With Quote Reply With Quote
« Previous Thread | Next Thread »

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Forum Rules