I stained a new furniture some days ago, using alcohol dye, and at the next the day I notice it raised lots grain. The wood was sanded up to #220 grit.
It also caused a very strange effect on a area where the veneer were extremely thin almost transparent (a corner of the original sheet), it kind of cause the veneer to separate from the middle, at sizes like a 1/64" with by 1/16 large.... i.e. like tiny spines.
All this definitely need to be fixed and I have to start with... should I use a wood sand paper(cream) or a wet/dry (black) sand paper?
I would like to sand, then apply a new coat of stain, just to even the color in case it gets messy.
What do you think?