Hi Creekers,

I have a question. I have been testing my grinder and my tools bounce on the wheel. I have dressed the surface and dressed the surface of the wheels. It is pretty clean but I can still hear a loosely held tool "bounce" on the wheel.

So I got online and looked at the oneway balancing system. I really thought it might help. But it said something to the effect of "the grinding wheel must have a 1" hole" then the bushings take it down to fit the 5/8th inch arbor on the grinder. I went back to the woodcraft website looking for the grinder and it is long gone. So I have no clue what the diameter of the hole in the grinder wheel is.

Since that grinder was pretty darn popular for a long time I figured someone might have done this before me. So does anyone know if the oneway balancing system will work on the Woodcraft slow speed grinder? Or do I need to get new wheels if I want to use one?

Thanks!
Joshua