Yes, this was all on a Schwarz sawbench, board held down with my knee, far end on a low Krenov-style trestle.
I do find that the 20-minute rips start to make my back ache leaning over like that, so the alternate position is to hold the board down with my foot. That still gives me much the same position over the cut, but with my torso upright. Not such a problem with the 7-minute rip!
Last edited by Steve Branam; 08-20-2010 at 5:13 PM.
Steve, mostly hand tools. Click on my name above and click on "Visit Homepage" to see my woodworking blog.