Quote Originally Posted by Jim N Burke View Post
The reason I asked about the HF motor and 220 V is that it doesn't have a plate, that I can see, regarding changing the voltage. I haven't pulled the impeller so it may be hiding there. Under the switch are just a single hot and neutral going into the case. The manual only mentions 110 so it seems possible they save money by buying single-voltage motors.
Jim
Jim, if the HF DC motor has only two leads going into the motor case, it is 110v for sure. The motor surely states it's full load amperage somewhere! Or, it is listed in the DC manual. But, the motor is not even close to 2hp if it runs on a 15 amp, 110v circuit. HF hype! At best, it's about 1.5hp.