Results 1 to 4 of 4

Thread: SMC 2010 Fall Turning Contest - Segmented

  1. #1
    Join Date
    Oct 2007
    Central KY

    SMC 2010 Fall Turning Contest - Segmented

    These are the segmented entries for the SMC 2010 Fall Turning Contest.

  2. #2
    Join Date
    May 2008
    Kansas City, MO

    SMC Fall Turning Contest 2010 (segmented) Chris Colman

    I would like to enter this segmented vase in the 2010 Fall turning contest.

    I made it for my wife, who helped design it.

    Segmented vase - 10 high, 7 wide.
    345 pieces Hard Maple, Black Walnut, Purpleheart.
    Spray polyurethane finish.
    Lit from inside with Christmas tree/nightlight size bulb.

    The pictures are in different lighting conditions to show the colors. The last picture is in a dark room with the inside light on.
    Attached Images Attached Images
    Quando Omni Flunkus - Moritatem!

  3. #3
    Join Date
    Sep 2007
    Stony Plain, AB CA

    SMC Fall Turning Contest 2010 (Segmented) Mike Golka

    Here is my entry for the Fall contest. End grain box from a lamination of maple, bloodwood, alowood, and cherry. Inspired by a design that was once available from Craft Supply I have been wanting to try my hand at creating a lamination like this. 4.5" tall 3.5" wide. Finish is friction polish.
    Attached Images Attached Images
    Always drink upstream of the herd.

  4. #4
    Join Date
    Dec 2005
    Texas Hill Country, USA

    SMC Fall Turning Contest 2010 (Segmented) Robert McGowen

    Walnut and Curly Maple. 7.5" tall x 5" wide x .25" thick. Sanded to 600 grit and finished with 3 coats of Antique Oil.

    Thank you to everyone involved in this contest and to the sponsors. RM
    Attached Images Attached Images

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts