I have an opportunity to do a Lasertile mural, approximately 5 by 8 foot, and have no idea how to price it. I know some of you have done these before and am hoping you can provide some pricing ideas.
Thanks,
Steve
I have an opportunity to do a Lasertile mural, approximately 5 by 8 foot, and have no idea how to price it. I know some of you have done these before and am hoping you can provide some pricing ideas.
Thanks,
Steve
Epilog Legend EX24, Corel X3
I'd have to price it based on the amount of detail in it (time) but I probably wouldn't go less than about $1,500-2,000.
Sammamish, WA
Epilog Legend 24TT 45W, had a sign business for 17 years, now just doing laser work on the side.
"One only needs two tools in life: WD-40 to make things go, and duct tape to make them stop." G. Weilacher
"The handyman's secret weapon - Duct Tape" R. Green
Thanks Joe, that confirms my thoughts. I was thinking around $1,500.
Epilog Legend EX24, Corel X3
Are these 6" laser tile? If so your cost would be around $900 just for the tile.
Architectural Sign Engraving ltd. (owner)
Xenetech 24" x 36" 40 Watt XLT, Xenetech Rotary's 16" x 25" Viper's
Lap top's HP & Lenovo, Windows 7, 32bit and 64 OS.
Xenetech XGW, Corel Draw X5, 1-Touch Photo and PhotoGrav3
Wacom tablet, HP Scanner, BenQ Monitor 24"
Material cost * (something between 2 and 3)
plus laser time * (something between $1 and $2 per minute)
plus whatever dollar amount you feel necessary for perceived value
plus whatever amount you deem necessary for market conditions
minus whatever amount you feel like wh*^ing yourself out for...
sorry to be a bit short but this has been asked, and answered, over and over and over and over and over and over and over.............................................. .................................................. ............................
There are plenty of examples online for 12x12 laser engraved granite tiles going for $100-$150. Even for larger jobs, you'll find engravers advertising $100-$150 / sf. (so the $100-$150 /sf ins't for single tiles only). That means that for a 5x8' @$2,000 you'll still only be at $50 / sf, which is at the LOW end of the spectrum. Granite tiles are also very cheap compared to laser tile, so you should be at $2,000 + material. This should be for laser time only and file / prep work should be extra, of course if it doesn't amount to be much, you might throw that in. So, my advise is that at the very least you should be at $2,000 + material (+file making/setup?). If you can get more, go for it!
Vytek 5151 FXB 100W, Adobe CS5 (Illustrator + Photoshop), Photograv 3.0, Laserworx (signlab)
MAKE SURE THE LASER TILE YOU ARE PITCHING IS IN STOCK!!!
From what I gather 3score went under and all their inventory is being managed by West Coast Laser.
West Coast laser has a couple different batches of certain colors. In my experience batch-2-batch the colors tend to not match perfectly. Neither does the coating on the back.
$$ - Also, watch out for the desired end result. If you are engraving all the way through and then paint filling, keep in mind the labor involved in repainting each tile, etc.
Or, if you are just trying to darken the mark on the back of the lasertile (something I personally have not felt great about, consistent results and enough contrast), make sure each tile is consistent. . .
Personally, I am not a huge fan of this tile. Sure, all of the (computer developed) product photos of lasertile installed in cool buildings look very sweet, but so does the photo-shopped photo of me doing 150mph in a Ferrari.
Has anyone had any success in this product on a large scale?
I've had a lot of success with their Laser GLASS.
I actually have a large glass mural that I sold for $100/sqft! No joke.
Alexander; not sure if you know but they have ceramic tile that you laser on the front and the glass is lasered and filled on the back....you mention about lasering the LaserTile on the back, which is not want you want...lol
Anyway...the economy is bad, however I'm dealing with a few custom home builders and the rich still have money & I'll tell you...no one does LaserGlass murals! Thats where the money's at...people with money want to be the first to get something - and laser Glass works for me.
I usually quote my jobs on ceramic at about $50/sqft. And the glass a little higher...just depends.
I'll take lower bids...I'd rather have my laser make some money, even if its not what I want...still better than not make any money.
yes, i am familiar with the laser tile that is ceramic. I guess i meant to say "laser tile glass"
do you have any install photos of the one you did for $100psf?
$50 a square foot is way too cheap for ceramic.
Last edited by Bill Cunningham; 10-26-2010 at 9:25 PM.
Epilog 24TT(somewhere between 35-45 watts), CorelX4, Photograv(the old one, it works!), HotStamping, Pantograph, Vulcanizer, PolymerPlatemaker, Sandblasting Cabinet, and a 30 year collection of Assorted 'Junque'
Every time you make a typo, the errorists win
I Have to think outside the box.. I don't fit in it anymore
Experience is a wonderful thing.
It enables you to recognize a mistake when you make it again.
Every silver lining has a cloud around it
Hi-Tec Designs, LLC -- Owner (and self-proclaimed LED guru )
Trotec 80W Speedy 300 laser w/everything
CAMaster Stinger CNC (25" x 36" x 5")
USCutter 24" LaserPoint Vinyl Cutter
Jet JWBS-18QT-3 18", 3HP bandsaw
Robust Beauty 25"x52" wood lathe w/everything
Jet BD-920W 9"x20" metal lathe
Delta 18-900L 18" drill press
Flame Polisher (ooooh, FIRE!)
Freeware: InkScape, Paint.NET, DoubleCAD XT
Paidware: Wacom Intuos4 (Large), CorelDRAW X5
Epilog 24TT(somewhere between 35-45 watts), CorelX4, Photograv(the old one, it works!), HotStamping, Pantograph, Vulcanizer, PolymerPlatemaker, Sandblasting Cabinet, and a 30 year collection of Assorted 'Junque'
Every time you make a typo, the errorists win
I Have to think outside the box.. I don't fit in it anymore
Experience is a wonderful thing.
It enables you to recognize a mistake when you make it again.
Every silver lining has a cloud around it