Well I looked at at the post here with no luck. I am trying to get the old head out to replace the bearings on my 22-675 DC-380 planer. The bearings don't look the same size as what a couple of people posted either. Anyway, for the life of me I can not get it out from the belt/pulley side. I thought I would be able to tap it out, bearing and all, from the pulley side then use a gear puller. It wiggles, and rotates, but won't come out. The head is supported by a wood block to avoid any binding. Any ideas would be appreciated since I am now shut down in my shop until I can finish this.
And to think all I wanted to do is replace the bearings for the person buying the planer. This should teach me.