Results 1 to 3 of 3

Thread: Uls m360

  1. #1
    Join Date
    Jan 2011
    Location
    Indianapolis, IN
    Posts
    7

    Uls m360

    has anyone dealt with masking material that is cut on a laser? I use it on glass, and i'm having trouble with the laser removing all the material that i want it to remove. On filled objects in Corel, the laser will etch the vertical edges very cleanly. But when it comes to the horizontal edges and middle of the filled piece it leaves uncut spaces. Anyone have an idea why i'm losing power in the middle?

  2. #2
    Join Date
    Dec 2004
    Location
    Southern California
    Posts
    1,125
    Jeff,
    How old is the tube?

    Have you cleaned the air vents for the cooling?

    Inspected your optics?

    Checked your focus?

    What power and speed are you using?
    Mike Mackenzie
    Sales and Service of Universal Laser Systems

  3. #3
    Do you have a filled shape that is outlined? Make sure both the outline and inside fill are true RGB colors in your palette, not CMYK or something else. Just a guess as to what might cause this.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •