Page 1 of 2 12 LastLast
Results 1 to 15 of 18

Thread: "Start to finish" - How To Threads

Hybrid View

Previous Post Previous Post   Next Post Next Post
  1. #1
    Join Date
    Jul 2007
    Location
    Pleasanton, California
    Posts
    730

    "Start to finish" - How To Threads

    Hi All,

    I'm compiling a list of threads that show the turning process from rough wood to finished object. When it gets finished it will become a new "sticky" in the list of "master stickies" so new users can find it easily.

    Here is what I have found over the last few days.

    List of start to finish turnings on SMC


    List of videos on Youtube


    If you have any more threads/vids to share please post them in this thread and we will add them to this post for easy searching in the future.

    Thanks!
    Last edited by Steve Schlumpf; 06-25-2013 at 6:39 AM.

  2. #2
    Join Date
    Mar 2010
    Location
    Lakeland Florida
    Posts
    2,297
    Greg, this one is in your honor, my friend! http://www.sawmillcreek.org/showthre...e-of-passage-)
    “I am enough of an artist to draw freely upon my imagination. Imagination is more important than knowledge. Knowledge is limited. Imagination encircles the world.” ~ Albert Einstein

  3. #3
    Join Date
    Jul 2007
    Location
    Pleasanton, California
    Posts
    730
    Just have to add this one: David DeCristoforo's awesome Start to finish… "Parfait" step by step. From drawing refinements to finished product!!


  4. #5
    Join Date
    Jul 2007
    Location
    Pleasanton, California
    Posts
    730
    A new one from Kathy Marshall, "Sissoo Hollow Form start to finish: http://www.sawmillcreek.org/showthre...tart-to-finish

  5. #6
    Join Date
    Jul 2007
    Location
    Pleasanton, California
    Posts
    730
    Baxter Smith's "Burl Brother" vase: http://www.sawmillcreek.org/showthre...herry-that-is)

    Although I'd call it "turned air with a little wood around it". Amazing!

  6. #7
    I have edited this thread to delete some of the posts that were just comments without adding links.

    Here is one I recently did - hollow form with pedestal and finial -http://www.sawmillcreek.org/showthread.php?174148-WIP-quot-Acero-Dolce-quot-or-quot-Sweet-Maple-quot-now-finished!&highlight=

  7. #8
    And, here is a short one I did just after I started turning on what I call a "clamshell" turning - http://www.sawmillcreek.org/showthre...Mahogany-Tiger

  8. #9
    Kathy Marshall's thread - How I Turn Boxes

  9. #10
    Join Date
    Nov 2009
    Location
    Erie, Pa.
    Posts
    147
    Steve Schlumpf on building a Vacuum System for a Jet 1642 - http://www.sawmillcreek.org/showthre...w-I-Built-Mine
    Paul Singer
    Jet 1642EVS 2hp

  10. #11
    Join Date
    Mar 2011
    Location
    Hudson, MA
    Posts
    56
    Curt Fuller's Bell ornament tutorial - http://www.sawmillcreek.org/showthre...bell-ornaments

  11. #12
    My offering of a Christmas light bulb tutorial-- http://ImageEvent.com/richinva/turning/bulbtutorial
    *** "I have gained insights from many sources... experts, tradesman & novices.... no one has a monopoly on good ideas." Jim Dailey, SMC, Feb. 19, 2007
    *** "The best way to get better is to leave your ego in the parking lot."----Eddie Wood, 1994
    *** We discovered that he had been educated beyond his intelligence........
    *** Student of Rigonomics & Gizmology

    Waste Knot Woods
    Rice, VA

  12. #13
    Join Date
    Oct 2008
    Location
    Lake Charles, LA
    Posts
    95
    Here is a link to Sean's video on making a bowl:

    http://hughto.blogspot.com/2010/12/blog-post.html

    Mike
    Last edited by John Keeton; 11-11-2011 at 3:59 PM.

  13. #14
    Join Date
    Nov 2006
    Location
    Forest, Ontario, Canada
    Posts
    386
    Well, I can add links to all the playlists I have posted over the past couple of years if that is what you are looking for. If that is not what you intended one of the moderators can edit/remove this post.

    In the order that I uploaded them to Youtube:

    Winged box: http://www.youtube.com/view_play_lis...003CDBECC3595B

    Ball & Cup toss toy: http://www.youtube.com/view_play_lis...AA050DC575CFA6

    No Chuck Bowl: http://www.youtube.com/view_play_lis...E200FF4AC117E3

    Faux Inside Outside Ornament: http://www.youtube.com/view_play_lis...93022F7F97CBF7

    Square Plate: http://www.youtube.com/view_play_lis...938CE91B063854

    Lidded Bowl: http://www.youtube.com/view_play_lis...B6AB86D55CE183

    Triangle Tea Light (inspired by Horst Hohoff): http://www.youtube.com/view_play_lis...808CD5E783692B

    Tool Handle: http://www.youtube.com/view_play_lis...63CA4614ADFCFA

    Shop made collet chuck: http://www.youtube.com/view_play_lis...A528EBEE61AB7A

    Acorn Birdhouse Ornament: http://www.youtube.com/view_play_lis...1A77398A3E3706

    Using the Beall Spindle Tap: http://www.youtube.com/view_play_lis...9DF0BB9F975C89

    Ash Bottlestopper: http://www.youtube.com/view_play_lis...9EFB0CB41AE86F

    Dovetail bowl from a board: http://www.youtube.com/view_play_lis...0B23AC7D271D38

    Turning a Mallet: http://www.youtube.com/view_play_lis...79FD997B782F62

    Eccentric Project (ring caddy): http://www.youtube.com/view_play_lis...6012ECE55C9297

    Shop vac based vacuum chucking: http://www.youtube.com/view_play_lis...FCB8CA2B04E33B

    Berger Style Scoop: http://www.youtube.com/view_play_lis...E95805E44A955E

    Exploring multi-axis spindles: http://www.youtube.com/view_play_lis...FD24352014A8EF

    Skew chisel practice session: http://www.youtube.com/view_play_lis...D6FE58157FFF2D

    My sharpening method: http://www.youtube.com/view_play_lis...36F6A65209D958

    Turning a face grain spindle: http://www.youtube.com/view_play_lis...BF3F620197FA32

    Simple Square Bowl: http://www.youtube.com/view_play_lis...92FDA120378AA6

    Turned Sewing Kit: http://www.youtube.com/view_play_lis...751C613640C19E

    Re-turning a Locust Crotch Bowl: http://www.youtube.com/view_play_lis...0F33732DA84BD1

    Bias Turned Cube Bowl: http://www.youtube.com/view_play_lis...8E69879B132D9B

    Rolly Polly Bowl: http://www.youtube.com/view_play_lis...A253BC9629F4A2

    Bowl Turning Practice Session: http://www.youtube.com/view_play_lis...989D60369D7CA2

    Turning Candlesticks: http://www.youtube.com/view_play_lis...75AB3BDADB8C3A

    Actually, I think I missed posting the candlestick series here when I uploaded it last week.



    There are also several single segment "technique" type videos:

    End grain hollowing with a 1/2" spindle gouge: http://www.youtube.com/watch?v=ijZ8Ph8KWcw

    Traditional grind gouge cut: http://www.youtube.com/watch?v=q1xwGQfSNaU

    Techniques: shear scraping and point tool use: http://www.youtube.com/watch?v=EXcHLJZi_zk

    More Techniques: Shear cutting and angled shear scraping: http://www.youtube.com/watch?v=_QJCLIWgC_4

    Oneway Flat Jaws: http://www.youtube.com/watch?v=XROCOQLX8ho

    Double Friction Drive: http://www.youtube.com/watch?v=lOI4dpk7pjA

    Gouge cuts on the outside of a bowl: http://www.youtube.com/watch?v=b_OZ-KM58B0

    Gouge cuts on the inside of a bowl: http://www.youtube.com/watch?v=Hliecq--lYw

    Making a tailstock follow block: http://www.youtube.com/watch?v=3SQcx2Z2t0g

    Making a Oneway banjo work on a Nova lathe bed: http://www.youtube.com/watch?v=KNp5btnkexM



    And just to keep everything in perspective we can't forget:
    "Outakes & Oopsies": http://www.youtube.com/watch?v=HV78hzkPlhI


    There are also several pictorial articles on my website, several of them "companion" articles to the videos:

    http://bobhamswwing.com/index_of_articles.htm


    Take care
    Bob

  14. #15
    Join Date
    Jul 2007
    Location
    Pleasanton, California
    Posts
    730
    Here is a new one: Manzanita vase with a 3/8" bowl gouge: http://www.sawmillcreek.org/showthre...Manzanita-Vase

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •