G0440 Grizzly Cyclone stand height ?

[Alain M Deschenes]

I look to build a stand for my G0440 Grizzly Cyclone but I do not find
the right size (height) to make it. I would like to know the top brace
height where the cyclone cone are bolted (the red arrow in the pict attached).

I know I can make it any height I want but I would like to have the
right Overall dimensions 93 -1/4" high) to fit with my ceiling and
the right height to fit the drum under.

Anyone can help me and measure the height of the grizzly g0440 stand ?
Thanks !

g0440.jpg

[Rick Moyer]

55" to the top of the pc you reference. I actaully moved those four pcs up to the top of the vertical legs (I have enough headroom) so I could put a larger drum underneath. Have not done that yet though. The top of the legs is 64 3/4".
You can't really make it any height you want without modifying it, other than how it's pictured or how I have mine. The legs have cutouts for the cross braces to fit into.

[Alain M Deschenes]

Ok, I will make my stand with 2"x2" angle steel and I will
put the top brace at 55" !
Thanks !

[Rick Moyer]

You're welcome. I see I misread your first post, and that you are fabricating your own stand so I guess you can make it any height you want! Disregard my last comment above about modifying the Grizzly stand.