[OP]
Contributor
This is what wobble was designed to do.
Font is New Hermes Normal Block, single line, no hatch of any kind
- the exact lettering I tool engraved these tags with 3 months ago.
Engraving is .002" deep (best I can tell) and looks nearly identical to my tool engravinng...
NGL1.jpgNGL4.jpg
Actually takes longer to laser them, but------ I don't have to stop every 5 plates to sharpen the laser beam!
========================================
ELEVEN - rotary cutter tool machines
FOUR - CO2 lasers
THREE- make that FOUR now- fiber lasers
ONE - vinyl cutter
CASmate, Corel, Gravostyle
Contributor
Now you are just getting lazy Kev. Everyone knows if you don’t sharpen your beam then you’ll lose your focal range. I thought you knew better than that…Originally Posted by Kev Williams
I don't have to stop every 5 plates to sharpen the laser beam!
Posting Permissions
Reply With Quote