removing rust from planes

[Stephen Sebed]

I've been asking a lot of questions about planes recently and I have a couple more. I looked at the step by step quide to tuning hand planes and it mentions using a non-abrasive cleaner to remove the rust. Is there a particular cleaner that you would recommend, or should I use good ol' WD-40 with some steel wool? If I use WD-40 what is the easiest way to get the greasiness off when I'm done?

Thanks again

[Jim DeLaney]

The WD40 and steel wool or Scotchbrite (my preference) will work just fine.

A light coating of WD40 left on the plane won't hurt a thing - actually, it'll help deter further rust.

<Center><FONT FACE="Comic Sans MS" COLOR="Blue">Jim D.</FONT></Center>
<P><center><img src="http://www.jcdelaney.com/usaflag.gif"></center><P>

[Jerry P. Doan]

Or you can try this, Stephen:

Electrolysis Made Easy