Only Contributors are eligible to win and must opt in to be entered.
The drawing will be on July 10th and August 15th
Free Wood for Laser and other uses which can be used for bookmarks or many other laser projects.

Examples can be seen on Ray's Website
Shipping is included to the lower 48 in USA.

"The thin stuff is veneer thickness to 1/8". It varies and a lot of it is thinner on one edge. It makes very nice business cards and many other things a creative person can visualize and produce. I have Black Walnut, American Black Cherry, White Oak, Jatoba, and a little Hard Maple in the thin stuff 5 1/2" with most 5 3/4" wide and I'll cut it to fit a flat rate mailer. The thicker stuff is 3 and 3 3/4 wide and is American Black Cherry. I will make 6 boxes of a mixture of this wood in the $10.40 size flat rate mailer to give to eligible Creekers
with a request for feedback from the winners. "

If you can't wait for the drawing...or want to buy from Ray...he wants to sell all he can before moving to Florida within a couple years and can't take it along.
He intends to offer a box through Friend Of The Creek for about $30 or $35 postage paid. It will be a real bargain.
Note: This would not be considered as prime wood because some of it has natural imperfections (which sometimes can enhance a project).
Also...Ray doesn't want to see this wood go to waste so "if anybody wants to come and pick it up. I'll give them some free, and help load it."
Send Ray a PM at

Only Contributors are eligible to win and must opt in to be entered.