Page 1 of 5 12345 LastLast
Results 1 to 15 of 62

Thread: Monthly Drawing...Free Wood for Laser and other uses

  1. #1

    Monthly Drawing...Free Wood for Laser and other uses

    Only Contributors are eligible to win and must opt in to be entered.
    The drawing will be on July 10th and August 15th
    Free Wood for Laser and other uses which can be used for bookmarks or many other laser projects.

    Examples can be seen on Ray's Website
    http://www.picturetrail.com/sfx/album/view/23805513
    Shipping is included to the lower 48 in USA.

    "The thin stuff is veneer thickness to 1/8". It varies and a lot of it is thinner on one edge. It makes very nice business cards and many other things a creative person can visualize and produce. I have Black Walnut, American Black Cherry, White Oak, Jatoba, and a little Hard Maple in the thin stuff 5 1/2" with most 5 3/4" wide and I'll cut it to fit a flat rate mailer. The thicker stuff is 3 and 3 3/4 wide and is American Black Cherry. I will make 6 boxes of a mixture of this wood in the $10.40 size flat rate mailer to give to eligible Creekers
    with a request for feedback from the winners. "

    If you can't wait for the drawing...or want to buy from Ray...he wants to sell all he can before moving to Florida within a couple years and can't take it along.
    He intends to offer a box through Friend Of The Creek for about $30 or $35 postage paid. It will be a real bargain.
    Note: This would not be considered as prime wood because some of it has natural imperfections (which sometimes can enhance a project).
    Also...Ray doesn't want to see this wood go to waste so "if anybody wants to come and pick it up. I'll give them some free, and help load it."
    Send Ray a PM at http://www.sawmillcreek.org/private.php?do=newpm&u=7921

    Only Contributors are eligible to win and must opt in to be entered.
    Last edited by Glenn Clabo; 07-14-2011 at 8:44 AM.
    Glenn Clabo
    Michigan

  2. #2
    Join Date
    Nov 2007
    Location
    Glenelg, MD
    Posts
    12,256
    Blog Entries
    1
    Definitely in
    Hi-Tec Designs, LLC -- Owner (and self-proclaimed LED guru )

    Trotec 80W Speedy 300 laser w/everything
    CAMaster Stinger CNC (25" x 36" x 5")
    USCutter 24" LaserPoint Vinyl Cutter
    Jet JWBS-18QT-3 18", 3HP bandsaw
    Robust Beauty 25"x52" wood lathe w/everything
    Jet BD-920W 9"x20" metal lathe
    Delta 18-900L 18" drill press

    Flame Polisher (ooooh, FIRE!)
    Freeware: InkScape, Paint.NET, DoubleCAD XT
    Paidware: Wacom Intuos4 (Large), CorelDRAW X5

  3. #3
    Join Date
    Nov 2006
    Location
    Trussville, AL
    Posts
    3,589
    Opt in please

  4. #4
    Please count me in. Thanks

  5. #5
    Join Date
    Feb 2007
    Location
    Harrison Arkansas USA
    Posts
    279
    Count me in. Thanks

  6. #6
    Please count me in. THe wood is really great looking. Thanks for the donation, Ray.
    Have a great day,
    Cary Fleming
    Laser Wonders
    Euless, TX
    VersaLaser VL-300 (40w), Corel Draw 2019, Photograv, Dye Sub Printers, Heat Presses

  7. #7
    Count me in as well.

    Thanks

    Dave Seaver

  8. #8
    Join Date
    Mar 2009
    Location
    Seabrook, TX (south of Houston)
    Posts
    3,093
    Blog Entries
    3
    Put me in.

  9. #9
    Join Date
    May 2010
    Location
    Woodside,CA
    Posts
    100
    I'd like to be included. Thanks

  10. #10
    Join Date
    Nov 2006
    Location
    Middle Georgia
    Posts
    47
    Thanks, Ray. Count me in.

  11. #11
    Please count me in.


  12. #12
    Join Date
    Jun 2008
    Location
    Southwest Missouri
    Posts
    77
    Please count me in Thanks
    probitix cnc Corel x3, Vcarve pro6.0, Aspire4.0

  13. #13
    I too would like to be included!

    Thanks!

  14. #14
    count me in!!

  15. #15
    Join Date
    Jul 2009
    Location
    South Dakota
    Posts
    690
    Blog Entries
    2
    count me in please.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •