Pics only for now & none showing the system in use on a wall - just yet.
In typical fashion, LOML had a "ten pound day" planned for me.
Y'all know what that is - trying to fit 10 pounds into a 1 pound sack
Here's the Thien seperator/DC/cleanup/work station I'm making right now.
I put a cleat on the right side - shown in the first picture holding my "do it all" table/surface.
That could just as easily be a wall with the table hanging on it.
I need to add some braces to the table. The plastic horse is just there for the picture.
It can be used attached to the DC station as a place to route or as a sanding station.
The table itself is also part of the outfeed for the table saw.
Under the metal can is a small box/support w/a pull out drawer/tool box.
The pull is a cleat & it can be hung on the right side.
There's a couple of pictures of the cleats - I'll get back with the dimensions on those.
The actual dimensions aren't critical as long as they are all uniform.
Forgive me for the somewhat misleading title since the cleats aren't shown being used on the walls just yet.
I have to plan out exactly where I want to put them.
That's a few weeks away at this point.
Reply With Quote