Page 1 of 2 12 LastLast
Results 1 to 15 of 28

Thread: New Member Here.......

  1. #1

    New Member Here.......

    Hello all. New member freshly signed up. Been wood working for about 15 years on and off. Recently jumped back into making saw dust. Celebrated my return with a new table saw purchase, I picked up the Delta 36=375 special at Home Depot for $399.00 Not yet assembled as the shop is full of remodelling supplies.
    I like to build clocks and small furniture. My shop has a 15 1/2 drill press, Delta Table Saw, several craftsman routers and router table, Dewalt sanders, Craftsman cordeless Drill/Driver - Ryobi Compound mitre Saw, Delta 16 inch Scroll saw. I am kind of a router nut. Will probably move out 2 of my cheap craftsman routers and buy a Dewalt 618 as my next purchase. Would also like to build "Norms" router table. Will soon be remodelling the kitchen and removing the cabinets which will all become part of my shop. Can't wait! Anyway, just a hello from a new member!
    Corey

  2. #2
    Join Date
    Sep 2004
    Location
    Pacific, Mo.
    Posts
    2,835
    Let me the 1st to welcome you. Have fun and "first lets talk about shop saftey"

  3. #3
    Welcome Corey. I am pretty new here myself. Great bunch of folks here. Always helpful and friendly. Never feel shy to ask any questions and to give feed back. All are welcome. Thats probably why this is now my favorite forum. (there are also quite a few funny guys here, always good for a laugh)

    again welcome and glad to have ya

  4. #4
    Join Date
    Oct 2003
    Location
    Fishers Indiana
    Posts
    74

    Welcome Corey

    Now, you're really up the Creek, join the rest of us, tell us where your from and don't be surprised if someone demands pictures.

    Steve

  5. #5
    Welcome to the Creek. I also build clocks. Just starting one this week.
    be sure to show us pictures of your projects.... we like pictures!
    Herb
    Carrollton, Texas


    Whatever you are, be a good one. -Abraham Lincoln

  6. #6
    Join Date
    Sep 2003
    Location
    Philadelphia, Pa
    Posts
    2,266
    Welcome aboard.
    Alan Turner
    Philadelphia Furniture Workshop

  7. #7
    Join Date
    Jun 2004
    Location
    Water Park Capital of the World
    Posts
    2,219
    Welcome, Corey. Lots of good people here and a lot of knowledge resides here in the "Creek".

    As has been stated, we like pics of projects, new tools, etc.
    Creeker Visits. They're the best.

  8. #8
    Join Date
    Oct 2003
    Location
    Moncton, New Brunswick, Canada
    Posts
    160
    Welcome to the Creek Corey. I'm sure you'll have a great time here.

    We had a discussion on Norm's router table design a while ago. Try this link:

    http://www.sawmillcreek.org/showthre...677#post117677

    Good to have you aboard.
    Bryan in Moncton, New Brunswick, Canada


    Look alive! Here comes a buzzard! -- Pogo, by Walt Kelly

    A child of five could understand this. Fetch me a child of five. -- Groucho Marx.


  9. #9
    Join Date
    Mar 2004
    Location
    Toronto, Ontario, Canada
    Posts
    3,789
    Welcome to Saw Mill Creek Corey. I discovered this site just about a year ago now and I can tell you that discvering it was one of the highlghts of 2004 for me. I hope that the same is true for you in 2005.

  10. #10
    Join Date
    Jan 2004
    Location
    Lewiston, Idaho
    Posts
    28,504
    Welcome to the 'Creek Corey! Wade right in ....the water's fine!
    Ken

    So much to learn, so little time.....

  11. #11
    Join Date
    Jan 2005
    Location
    Charlotte, Michigan
    Posts
    1,218
    Welcome! I'm kinda new here myself, but I have found out there is a wealth of information to be learned here from these guys and gals.....Enjoy!

  12. #12
    Join Date
    Oct 2004
    Location
    Arlington, Texas
    Posts
    111
    Glad to meet you Corey, as has been said, a wealth of information and wholesome place to hang out. By the way, were are you from?

  13. #13
    Thanks for the great welcome guys. I hail from Council Bluffs, Iowa, accross the muddy missouri from Omaha, Ne. Looking forward to being a part of this site.
    Thanks again!
    Corey

  14. #14
    Join Date
    Mar 2003
    Location
    SE PA - Central Bucks County
    Posts
    65,685
    Welcome, Corey! 'Nice place to put your feet up after a hard day chasing sawdust (or making a living)...
    --

    The most expensive tool is the one you buy "cheaply" and often...

  15. #15
    Join Date
    Dec 2003
    Location
    Laguna Beach , Ca.
    Posts
    7,201
    Corey,

    Welcome to the Creek....you will like it here...we have only nice people and the food is excellent!
    "All great work starts with love .... then it is no longer work"

Similar Threads

  1. New Member, PC 16ga Nailer Question
    By Jeff Roberts in forum General Woodworking and Power Tools
    Replies: 8
    Last Post: 11-11-2004, 11:57 AM
  2. New Member
    By Josh Bendel in forum General Woodworking and Power Tools
    Replies: 30
    Last Post: 09-03-2004, 2:26 PM
  3. new member
    By Steve Hellmann in forum Freedom Pens
    Replies: 2
    Last Post: 04-28-2004, 2:26 PM
  4. New Member
    By Travis Lanman in forum General Woodworking and Power Tools
    Replies: 22
    Last Post: 01-30-2004, 11:17 PM
  5. New Member - First Posting
    By Boyd Gathwright in forum General Woodworking and Power Tools
    Replies: 5
    Last Post: 01-23-2004, 1:39 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •