I am trying to find out if a Clear Vue cyclone would be adequate for my shop. Machinery includes a 16" slider, 20" jointer/planer combo, 10" cabinet saw, shaper, lathe, and a three horse router connected to a 10' drop of flex hose. I use the router for cutting entire 3/4" MDF sheets into parts using templates (in terms of dust creation, think CNC). No station would be further than forty feet from DC, 6"duct through out, with ecogates on everything.
I'm not looking for a bunch of meaningless numbers, CFM this, static pressure that, inches of water, blah blah blah. I would like to hear some real world experience with the Clear Vue and big planers/jointers or from someone creating a lot of MDF or other fine dust.