This is my first project that I would consider nice furniture. I'm working on a mission style bench, with lots of slats and rails. I've hand planed the boards with a smoother prior to finishing and the edges on the boards are really sharp and just seem to need a touch of rounding over or else it's going to get dinged and splintered and start catching. It's not addressed in the plans, is there some convention to this? I've never taken the opportunity to look over a nice piece of Stickley furniture (note to self) to see how the sharp the edges are. Would a 1/16" round over be in order, or maybe just a pass or 2 with sand paper on the edge?