(Sorry about the title spelling, I can't edit that.)
Well, I'm rebuilding the drawers in my kitchen to accept Blum Tandem gliders. I have 2 questions.
1) Before I cut the drawers to accept the 1/4" baltic birch ply I'll be using, I wanted to know if the plywood drawer baseshould be glued in, left free floating, or glued on one side?
2) The blum hardware forces use of 1/4" thick ply bases, which isn't ideal (though it'll be fine for these 14" wide drawers). Can I put a 1/2" beam under the ply to stiffen the base, or would this interfere with #1 above? I'd assume not since I could fasten the bean to the drawer structure and just lay the ply on it.
Thanks in advance!