Results 1 to 2 of 2

Thread: tormek japanese 4000x wheel

  1. #1

    tormek japanese 4000x wheel

    hi all

    I am seeking some objective information for the lapanese wheel from tormek (sj 250)

    anyone out there have experience with it


  2. #2
    Join Date
    Jun 2008
    so cal
    Hi Martin,I have a Wheel that is yellow cant remember what grit was stamped on the side but it did say japan.So it was on my tormek for a short time.It was only good for polishing a edge.If i had two machine it would have been more useful to me.So now i keep it soaking in water.And use it as a big stone on its side.IT really cuts slow like a polishing stone.IT also has a lead center and needed alot of truing.Hope this helps Andrew

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts