Results 1 to 8 of 8

Thread: Question For Trotec Speedy Users

Threaded View

Previous Post Previous Post   Next Post Next Post
  1. #1
    Join Date
    Mar 2005
    Location
    Gig Harbor, WA
    Posts
    1,157

    Question For Trotec Speedy Users

    Have you had a situation where the imported plate is so complex that sections of the graphic are left out of the preview/job.You have to reduce the dpi way down to get the entire job and sometimes that does not do it. Sent the file to Trotec and they could not see a problem. Like its a memory issue but it happens on small jobs like nametags with a jpg logo.I use Corel 9 and I know that is not the issue. Is there a memory upgrade? (JC 6.2.3) (divers 5.14 & 5.15)Your thoughts........

    The PDF show the results between a 500 and 600 DPI image at the laser Job Control preview the twist is not a large file and shown in the CDR attached.
    Attached Files Attached Files
    Last edited by Mark Sipes; 02-16-2012 at 5:25 PM.
    Mark
    In the Great Northwest!

    Trotec Speedy C25, Newing-Hall 350 (AMC I & HPGL), NH-CG-30 (Carbide Cutter Sharpener)
    Sawgrass 400 Gel Ink Printer, CS5, 5/9/x6 CorelDraw

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •