Page 1 of 4 1234 LastLast
Results 1 to 15 of 65

Thread: Kickback on Camera

Hybrid View

Previous Post Previous Post   Next Post Next Post
  1. #1

    Kickback on Camera

    I posted a story and video yesterday in which I tried to recreate a kickback on a table saw. I did get the kickback but even with all of the planning and knowing what was about to happen I very nearly got hurt. the video shows very clearly the speed and power of this type of event and if I had not seen it myself (later) I would have never believed how my hand was sucked toward the blade. In the last 13 hours or so I have gotten over 200 emails from people going to their shops to reinstall their splitters or blade guards because of how scary this footage is. No blood or anything (thankfully) but scary nonetheless.

    See the story and video
    "Because There Is Always More To Learn"

  2. #2
    Join Date
    Oct 2007
    Location
    New Hill, NC
    Posts
    2,568
    Tom, thanks for posting. Your video should be mandatory watching for any woodworker that operates a tablesaw or a router.

  3. #3
    Join Date
    Mar 2008
    Location
    Mansfield MA
    Posts
    1,372
    +1 on this being mandatory viewing.

    Tom - thanks for the video and writeup. And yes - you are an idiot. Be thankful you can still count to 10.

    I had one kickback a few years ago. I was not using the splitter/blade guard on an older Delta hybrid because....well, I'd like to say because it was so hard to install and align (true) but realistically, I just did not know any better. The piece flew right past my ear and across the basement. No injuries to me, and I keep the piece in my shop as a reminder.

    EDIT: I looked at the video more closely this time (I was in a rush when I first watched it). It clearly dispels any notion that your hand will move towards the blade because of any force or pressure from trying to push the board forward or down. It looks like Tom's hand was pulled into the blade by the pushblock, and there is no way anyone is strong enough or quick enough to stop that from happening IMO.
    Last edited by JohnT Fitzgerald; 02-17-2012 at 8:40 AM. Reason: added comment
    I wondered why the baseball was getting bigger....then it hit me.

  4. #4
    Join Date
    Jan 2010
    Location
    Weston, CT
    Posts
    274
    Wow that video is scary. Boy are you lucky that the pushblock touched the blade and not your hand. I think I am going to get my hand planes tuned up, so the next time I have to trim a board like you were, I can do it with a tool other than the table saw.

  5. #5
    I've been meaning to install an MJ Splitter that I received a few years ago for my Craftsman contractor saw. After watching this video, I'm not wasting anymore time. That last shot made me cringe. Thanks for actually putting this together.
    * * * * * * * *
    Mark Patoka
    Stafford, VA
    * * * * * * * *

  6. #6
    Join Date
    Feb 2010
    Location
    Toledo, OH
    Posts
    708
    That's scary!! You are truly lucky you still have ten digits after that fiasco. Seems like the industry could do something like that without anybody risking any body parts. I won't chime in with everybody else as you already know the foolishness of your actions. Thanks for having a set big enough to show what we all knew in the back of our mind even if we don't pay attention to it.

  7. #7
    Join Date
    Dec 2010
    Location
    Bristol and Pound Virginia
    Posts
    237
    Wow Tom! You're not an idiot you're a dumb a$$! LOL! I mean that with respect! LOL! What you did here is nuts but I bet you saved several users fingers. I use the riving knife every time I can but, after watching this, I will find a way to use it EVERY time. Thank you for this. This video should be included with every tablesaw sold.

    I have been ripping without a knife/splitter and seen the wood closing up at the end after the cut. Thinking I could hold it I pushed on trying to hold it a little tighter. I've been blessed with not having a hard kickback. I hear God watches over fools so I guess thats why I still have my digits. I guess I should be a charter member of the afore mentioned "dumb a%# club" myself. Never again. Thank you my friend. You have most likely helped save my hands as well.

    MODS....If this isn't a STICKY I don't know what is.
    Last edited by shane lyall; 02-17-2012 at 8:08 AM.

  8. #8
    Join Date
    Aug 2008
    Location
    Los Chavez, New Mexico
    Posts
    753
    Blog Entries
    1
    Tom,
    Thanks for making this video. Sure makes you wonder why manufacturers can't offer a video like this with every saw. The 3 pages of printed do's and don'ts which aren't usually even specific for machine you are buying are clearly there to cover their legal butts.. and will never be as vivid or effective as this one little video.



  9. The slow motions shots had my anxiety level at about a 9. It's good to see that you came out of this without any injuries...

    This video is going to be a wake-up call for a lot of WWs out there (myself included). Without that push block? Much different ending... You would have had to give the video a 'How-to' title: "How To Quickly Detach Your Fingers"

  10. #10
    Tom,
    Thank you for the wake up. SMC and other forums are a treasured vault of information, this is one of the gems.

  11. #11
    Join Date
    Mar 2006
    Location
    SoCal
    Posts
    22,492
    Blog Entries
    1
    I am a splitter-nazi; any and all cuts that can be made with splitters, guards, etc. should be. No excuses. You are never in enough of a hurry to hack off a finger. Constant diligence and care will yield you years of enjoyment in the shop. Play carefully ;-)
    "A hen is only an egg's way of making another egg".


    – Samuel Butler

  12. #12
    Join Date
    Dec 2003
    Location
    Putnam County, NY
    Posts
    3,086
    What a powerful video! I witnessed a kickback at a college shop I was taking a woodworking class at. The 10"x7" piece of 5/4 maple flew like a hypersonic frisbee about 20 feet before it hit the Instructor's Assistant in the forehead. The wood had exactly the same groove as your piece.
    Your video made me wince.
    I could cry for the time I've wasted, but thats a waste of time and tears.

  13. #13
    Join Date
    May 2005
    Location
    walnut creek, california
    Posts
    2,347
    i cringed as i saw your hand getting pulled toward the blade! please don't do that again... we need those product reviews

  14. #14
    My 8th grade woodshop teacher used to take the guard off the table saw and gather a new class around the safe(?) sides of the saw and cause a kick back about 8 feet into a old french door(rather dramatic effect). Even for stupid 8th graders it made a point.
    Couple days later you'd notice he fixed the door for the next bunch.

  15. #15
    Join Date
    Apr 2007
    Location
    Mebane NC
    Posts
    1,014
    Thanks Tom. It's so easy to get complacent and skip the safety gear. It's time for me to make some ZCIs with splitters and 1 without for the times I use a sled. Paul

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •