My new demo machine is almost complete. Its still missing the SuperPID speed control, Polycarb rack guards, and rear guard.

The table is removable for transport, as is the monitor and keyboard mount. The hose support is collapsible.


_MG_1063.jpg

The stand is a steel frame covered with 3/4" Baltic birch. Inside the stand is my integrated PC/control case and a Fein dust collector.



_MG_1066.jpg

The only external connection is a single power cable and the mini cyclone. These are packed up and placed in the stand for transport.

The machine has a 18" x 14" cutting area with extra clamp space at the front and rear.

I am going to do a dry transport run next Saturday to our local Woodcraft.

I will provide some Vids soon.

FYI, I now have three machines up and running. The other two are larger machines, but this little guy is my favorite.