Results 1 to 3 of 3

Thread: Kayak progress update

  1. #1
    Join Date
    Feb 2003
    Location
    Johnson City, TN
    Posts
    665

    Kayak progress update

    Well I have made a little progress on the kayak. The deck is attached to the hull and glassed. I have cut out the hatches and the cockpit ring is installed. I'm working on glass tapeing the inside of the joint between the deck and the hull. Hard to get up into the ends! after that it's on to installing the bulkheads and the ledges for the hatches to seal to.
    Attached Images Attached Images
    Sparky Paessler

  2. #2
    Join Date
    May 2008
    Location
    E. Hanover, NJ
    Posts
    443
    Nice job. I would love to have seen how you did the cockpit coaming. Are the studs for adjustable foot pegs?

  3. #3
    Join Date
    Feb 2003
    Location
    Johnson City, TN
    Posts
    665
    Conrad, Yes those are for the rails for the foot pegs. The cockpit coaming was 4 pieces. 2 spacers and 2 of the wider top pieces. I just used a random orbit sander to round the inside edge and hand sanded the outside edge. Did not take any pictures of that step though. Thanks!
    Sparky Paessler

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •