i just got a grizzly spindle sander that has a 2" dust port. Where can I find a 4" to 2" dust port adapter??
i just got a grizzly spindle sander that has a 2" dust port. Where can I find a 4" to 2" dust port adapter??
Rockler is where I got mine. They have a good selection.
http://www.rockler.com/product.cfm?page=16965
i only see 4" to 2 1/2". I would like a 4" to 2"
You don't say ID or OD but, Peachtree item 474
"A hen is only an egg's way of making another egg".
– Samuel Butler
Is there any way you can enlarge the port? That would be better than reducing to fit the port.
C
http://www.rockler.com/product.cfm?p...uuid=&sli_sid=
Scroll down to the price listing there is a 4" to 2" reducer.
i have not looked into enlarging it. Thanks for the good idea.
Enlarging will be much more effective. A DC won't put much through a 2" port so you need a shop vac unless you increase the size. Dave
did you look at the plumbing pipe reducers ?
This might be one of those times that hooking a vac to your sander is the better option.
On my Delta BOSS spindle sander I made a wooden donut to fit it to 2 1/2 hose. Works great.
Rick Potter