Looking to buy a reconditioned chuck direct from Nova. Is the supernova2 worth the extra cost vs. the G3? Looks like a better chuck for $10.00 more.
Looking to buy a reconditioned chuck direct from Nova. Is the supernova2 worth the extra cost vs. the G3? Looks like a better chuck for $10.00 more.
According to the Teknatool website, the Nova G3 chuck designed for the Mini, Midi and smaller lathes with up to 14" diameter swing while the SUPERNOVA2 CHUCK
is desinged for use on lathes with up to 20” swing. I have 2 SN2's and just recently purchased a reconditioned unit. It works just as well as the new one I purchased over 5 years ago.
I have several of each. The adjustment range is exactly the same for either chuck. They both also accept all the same jaw sets, although the big Power Jaw set is not recommended for the G3. I have installed the smaller jaw sets (20-35mm) on the G3s. I've found the standard 50mm set is used the most, with (in my case) the Power Jaws in #2 position. The 35 and 45 mm spigot sets come in handy if you have a return job where the tenon has to be made too small to fit the 50mm jaws.
If you must choose between a SN2 or G3 because of budget issues, get the G3 with 50 mm jaws.
Yeah without a dought!Is the supernova2 worth the extra cost
Sid
Sid Matheny
McMinnville, TN
I think the question depends on the intended use. I use the SuperNova2 with large jaws for large, heavy pieces. I have a G3 with small jaws that I use with smaller, lighter pieces. I hate to change jaws, so I have several chucks. I find the G3 great for making 1.5" x 2" birdhouse ornament bodies, I wouldn't use it for roughing out a wet 15" bowl blank. If I would only have one chuck I would have a SuperNova2.
I should have added that I, too, have purchased a reconditioned SN2, and could not discern any difference between it and a new one - packaging and all.
I have never ordered any of the refurbs but I will when I need another. I currently have an SN2 and 2 G3s. I too dislike changing jaws.
____________________________________________
JD at J&J WoodSmithing
Owingsville, Kentucky
"The best things in life are not things."
Denny, try this - http://www.novatoolsusa.com/RECONDIT...ck-23055-R.htm
Russ, I have both, and would easily recommend the SN2 for the difference. Were I buying new, and had the Delta 46-460 still, I probably would not go the difference in new retail cost for the SN2. However, given the likelihood you will end up with a bigger lathe - get the SN2!
Yes! the SN2 is the right way to go -- of course that is just my opinion and i am just an old man with set ways or some my wife tells me.
921 miles South from that famous person Steve Schlumpf
I have 2 each, although I don't think the price difference is only 10 bucks. I agree with all the others. If you have a midi/mini, the G3 is just fine. If you want to turn on a bigger lathe, get the SN2. OR both, and you can have standard G3 50 mm, and a 4 or 5" on the SN2. I do not like changing jaws either.
Just got my second SN2 today. It was a reconditioned one for $100. Cant go wrong at that, it works just as good as the new one I bought several years ago. Jared
I can't find where it say whats included with the reconditioned chucks. It tells that you need an adapter ($20), but theres no mention of included jaws.
The recon G3 just isn't a deal. You can get a new one w/adapter and jaw set for $125, free shipping. The recon unit is $89.99 + $12.49 shipping, adapter +$20 and your in for $122.48 and that doesn't include tax or shipping on the adapter, and it's iffy if you get a set of jaws with it.
Jim, I would imagine the recent activity in this thread has them temporarily out of stock. You might want to just keep checking the site daily.
Although not the answer I was looking for...your advise is taken sir...Happy Easter!
Your Respiratory Therapist wears combat boots