Some. Some people have said they are good so I figure it's worth a shot.
Well..... since going with cordless, I avoid screwdrivers all together. Dont remember what it was but a while back the cordless wasnt available and I was 'forced' to drive a screw by hand and was swearing the whole time....... smh. Ive gotten old, lazy, and soft.....
A coworker once told me that Sears did a survey to determine if their customers would prefer quality or price.Craftsman has made a 50+ year journey from excellent to good to junk. Most people want junk. I have some 20 year old Craftsman screwdrivers and they are pretty good.
So we can blame it on the customers that answered the survey.
I have worked with many people who feel a low price is more important than if the tool shaped object will work well at its purpose.
Often people will buy a tool for onetime use.
"A pessimist sees the difficulty in every opportunity; an optimist sees the opportunity in every difficulty."
- Sir Winston Churchill (1874-1965)
GOD is not dead and American is still alive until further notice
To me tools honestly are not really tools. They are more like objects from which i derive satisfaction. Neither my life, safety nor income will ever depend on anything as trivial as a screwdriver, much less a smoothing plane or dovetail saw They really are toys for me. If I didn't like them I'd buy cheap ones.
“ Freedom is the last, best hope of earth. ” — Abraham Lincoln
Please help support the Creek.
OK, I got my Wilde pry bars from Eppsteins today. $35 shipped and I get this huge box. These things are gigantic. Granted the are the sizes advertised but that didn't register well in my mind. They'll come in handy for sure, but now I need to find what must be classified as a mini-prybar for all those former screwdriver-as-prybar jobs! They feel really nicely made too.
I also have a single clear yellow handled Stanley #2 phillips that has a partially melted tip from where I inadvertently touched both terminals on the garbage disposal (it was a tight area to work in, and I didn't remove the screwdriver before turning to readjust...learned that lesson QUICK!). It has performed excellently for over 20 years.
Regarding Craftsman in general, I have a cman socket set that was a gift from my brother just over 20 years ago. Had to swap the 1/4" ratchet because it broke at least one tooth, but otherwise have had no problems with it. (The swap was painless, as well.)
I'm thinking more and more that I'll have to buy my father a new set of tools and steal all his old ones.
Not all chemicals are bad. Without hydrogen or oxygen, for example, there would be no way to make water, a vital ingredient in beer.
Wera, top notch. I have several sets. Where I work we are a distributor for Wera and periodically they offer screwdriver sets at promotional pricing. At my cost they are very cheap so I have stocked up. It is hard not to buy something when the flyers come out.
Here's a link to an example set on Amazon.
The really tough ones are the Kraftform Plus 900 Series, The Chiseldriver as they call it. They actually show and describe it in the catalog as having an impact cap on the handle. They extend the shank through the handle to a striking cap on top of the handle. The handles are black with yellow grip inserts. You can find them on the internet for around $50 for a six piece set and rack.
We sell quite a bit of Wera in the industrial market. Most of it are insert bits and the quality and durability is much better than the market leader who seems to have fallen down on quality.
All Wera items are pricey but they are top quality.
Tim just cost me $36.36...even got free shipping. $6.06 per quality screwdriver..that works for me...and the math was easy, too.
Crown Molding: cut, cope, cuss, caulk, chill....
Did you know SMC is user supported? Please help.
I got a box of Wera and Felo screwdrivers in the mail the other day and I like both brands. I think the handles on the Wera are more comfortable.
So I didn't replace my Craftsman Torx screwdrivers because I don't use them that much. I had occasion to use the smallest (T7) this week and does the head strip? No! The handle snaps right in half in my hand. Wihas on order...