I have some wood I'm going to use to build a table with and both my wife and I agree it needs to be a four sided rough edged table.
I can only see two designs
Picture frame miter joints edges with a center of glued up boards.
Four triangles all mitered together.
This all sounds great but I won't have a straight edge to base the miter cut from.
The wood is about 16-18" wide and 2" thick and 8 feet long. The bark is off but the rough edges I would like to preserve.
The table should be about 3-3 1/2 feet square or 3 x 4 feet
Getting these miters cut at a 45 degree so it's close to a square or if a rectangle is easier I will go that way.
Has anyone done this or I'm I missing something real easy about this.
Help. Thanks