Page 1 of 5 12345 LastLast
Results 1 to 15 of 74

Thread: Ever hide tools from your wife??

Hybrid View

Previous Post Previous Post   Next Post Next Post
  1. #1
    Join Date
    May 2008
    Location
    MA
    Posts
    2,255

    Ever hide tools from your wife??

    Its a sickness - I keep dragging home equipment that has pretty questionable need. Maybe there is a support and recovery group for it.

    The latest is this line boring/hinge press machine. I pulled the trigger on it for $200, since I have some bookcases and cabinets to do and find drilling the shelf holes tedious. Figure I can use it, resell it if I want (of course I never actually resell anything - just collect), and come out cheaper than a fixture (I have a homemade shelf pin guide - but this thing will give some satisfaction, pneumatics and all).

    Its going to take up shop space for most of the time, and my shop is getting full (Im just a hobbiest - not a production shop). And I know I am going to get at least one eyebrow raised when the wife unit sees it. But in general she never comes out to the shop, so am thinking I will just push it in a corner never to be noticed - until after the new bathroom vanity is done complete with a nicely spaced row of shelf pin holes in at least a couple places..... (I joke - kinda - she is very supportive and Im not out blowing our mortgage or anything - but at a minimum she might be overdue for some nice earrings.... or a bracelet....... )

    Obligatory pics:

    photoaaa.jpgphotoddd.jpgphotofff.jpg
    Attached Images Attached Images

  2. #2
    Join Date
    Jan 2010
    Location
    LA & SC neither one is Cali
    Posts
    9,447
    Great score, YOU SUCK!

    I don't hide tools since I am usually to excited about them the vast majority of the time my wife is a "if you want it get it" (within reason) type of wife. Funny enough I did get a raise eyebrow for the Dewalt tracksaw set I just got on sale since it is tax time, MY rule is we don't bay anything non-essential from mid-March to this year April 16th due to quarterlys and last years estimated "shortfall" falling on the same day... That was one of the few purchases I didn't run around excited about since my aim was to be hush hush but Amazon had her number in the computer so they called here to set up delivery, the fact it was truck shipped had her concerned I had bought another bandsaw...
    Of all the laws Brandolini's may be the most universally true.

    Deep thought for the day:

    Your bandsaw weighs more when you leave the spring compressed instead of relieving the tension.

  3. #3
    Join Date
    Feb 2011
    Location
    Central WI
    Posts
    5,666
    When I replaced my Laguna LT18 with a Yates Y20 my wife didn't notice for a year. I've found it cheaper to anticipate the jewelry upcharge rather than play catch up. Dave

  4. #4
    Join Date
    Jan 2010
    Location
    LA & SC neither one is Cali
    Posts
    9,447
    Quote Originally Posted by David Kumm View Post
    When I replaced my Laguna LT18 with a Yates Y20 my wife didn't notice for a year. I've found it cheaper to anticipate the jewelry upcharge rather than play catch up. Dave
    Well since the only Y-20 bandsaws I have seen are Snowflakes it would seem a person that didn't notice the difference between a square solid door saw and a round holey doored saw might not notice the difference between a CZ and a real diamond which might lower the burden of the jewelry upcharge...
    Then again I forget, even if a woman doesn't recognize a CZ (in reality 99.99% can) they definately have a friend that would... I wonder if I could then convince my wife that there are no worries, my Minimax is actually a fake Chinese knockoff, maybe take a marker to the saw and turn it into a Chinimax...
    Of all the laws Brandolini's may be the most universally true.

    Deep thought for the day:

    Your bandsaw weighs more when you leave the spring compressed instead of relieving the tension.

  5. #5
    Join Date
    Jan 2006
    Location
    Grand Forks, ND
    Posts
    2,336
    Quote Originally Posted by David Kumm View Post
    I've found it cheaper to anticipate the jewelry upcharge rather than play catch up. Dave
    I share the same beliefs. Except for large purchases, its hard to hide a KF700.
    A bus station is where a bus stops. A train station is where a train stops. My desk is a work station.

  6. #6
    Hide tools from her? Good heavens, who would I turn to when I can't find something??

  7. #7
    Join Date
    May 2008
    Location
    near San Diego: unincorporated section of county
    Posts
    764
    I tried but it doesn't work. She doesn't know what a bench chisel is used for, but first time I left a newly acquired 5/8" chisel (bought to fill the gap between the 1/4" and the 3/8"--both of which she had seen) out on the work bench, she said "when did you get this one?"

  8. #8
    Quote Originally Posted by James Baker SD View Post
    I tried but it doesn't work. She doesn't know what a bench chisel is used for, but first time I left a newly acquired 5/8" chisel (bought to fill the gap between the 1/4" and the 3/8"--both of which she had seen) out on the work bench, she said "when did you get this one?"
    My wife is very savvy when it comes to tools and mechanical stuff. She also takes care of all the financial stuff in this partnership because I absolutely cannot stand to do the "books" so it is impossible for me to hide anything from her as she always sees the bills. I also get the "when did you get that" comment on those rare occasions when I have successfully acquired something new without her knowledge.

  9. #9
    Join Date
    Oct 2008
    Location
    Kapolei Hawaii
    Posts
    3,236
    Quote Originally Posted by John Coloccia View Post
    Hide tools from her? Good heavens, who would I turn to when I can't find something??
    ROTFLMAO!

    I though I was the only one who brings a gouge into the kitchen and leaves it there..... Where did I leave my gouge? Honey?!?!?!? Have you seen my gouge?

  10. #10
    Join Date
    Apr 2004
    Location
    Green Bay
    Posts
    392
    When I first got married.. no doubt.. she hated tools... Over time that changed when she realized the benefits, but she still complained.

    Thank God that relationship ended.

    I have bought my girlfriend two lathes, turning tools, sharpening jigs, bandsaw, drill press, and a chest to store stuff... Am I happy now or whut.

    When I score a craigslist deal, we do high fives..

    She has bought me a midi lathe and loved the 3520B when it was born..

    :-)

  11. #11
    How about the opposite? I came home one day to a long box that UPS had delivered, new skis, I said they were extra long clamps and hauled the box to the basement. I got busted a few weeks later later though, by my daughter, when we went skiing. In my defense, it was screaming good deal and I really did need to upgrade my skis. I paid for it later that year though, when she wanted new patio furniture.

  12. #12
    Join Date
    Apr 2008
    Location
    Edmonton, Canada
    Posts
    2,479
    Quote Originally Posted by Kyle Iwamoto View Post
    ROTFLMAO!

    I though I was the only one who brings a gouge into the kitchen and leaves it there..... Where did I leave my gouge? Honey?!?!?!? Have you seen my gouge?
    LOL! I thought I'm the only one who after searching for a tool for 20 minutes finally comes and ask her help. She would come to shop and look around for 2 minutes
    and says: "is this what you were looking for?!" It has happend countless number of times!

  13. #13
    Join Date
    Aug 2007
    Location
    Dickinson, Texas
    Posts
    7,655
    Blog Entries
    1
    mAKE IT THREE.

  14. #14
    Join Date
    May 2008
    Location
    MA
    Posts
    2,255
    Quote Originally Posted by Kyle Iwamoto View Post

    I though I was the only one who brings a gouge into the kitchen and leaves it there..... Where did I leave my gouge? Honey?!?!?!? Have you seen my gouge?
    Its not a very serious condition, until she starts finding them in the refrigerator......

  15. #15
    Join Date
    Nov 2006
    Location
    Trussville, AL
    Posts
    3,589
    Quote Originally Posted by Carl Beckett View Post
    Its not a very serious condition, until she starts finding them in the refrigerator......
    I would have found them in the fridge...when I went to get my CA glue <g>.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •