Results 1 to 3 of 3

Thread: Stickley chair seat cushion thickness

  1. #1
    Join Date
    Jan 2009
    Location
    Indianapolis
    Posts
    1,562

    Stickley chair seat cushion thickness

    Greetings.

    Looking for help on cushion thickness for the seat and back on a Stickley design Morris chair. I am going to use marine foam since these are going on a screened porch. I was thinking 3 inches for the seat and 2 inches for the back.

    Any suggestions greatly appreciated.

    Thanks to all.

    Brian.

  2. #2
    Join Date
    Feb 2010
    Location
    Pueblo, CO
    Posts
    328
    I built a set of Morris Chairs a few years back, had the cushions done professionally, the back and seat pads are the same thickness and, without measuring, they seem to be about 4" thick.

  3. #3
    Join Date
    Dec 2009
    Location
    Urbandale Iowa
    Posts
    286
    Did you check the great Morris chair thread? There are over 500 posts; I'll bet someone mentioned cushion thickness.
    Good, Better, Best never let it rest
    until your Good is Better and your Better is Best

    Member of M-WTCA Area D

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •