Anyone know the impeller size on the Jet DC1200?

[Carl Beckett]

I have a Jet DC blower with a 2hp motor. I believe this to be the DC1200. (note it is a 2hp, NOT the 1.5 hp).

And I found an older blower available, that has a 14" impeller (which I believe is larger dia than what I have now) - but - its also rated at 2hp (although a much older motor, and perhaps not all hp ratings are created equal).

Im trying to get some more info on the motor. 14" sounds a little large for a 2hp motor (but might be standard on a 3hp motor). The question I need to figure out is, is it really an upgrade over the current 2hp Jet blower (which I 'thought' only had a 12" impeller but I havent actually taken it apart and measured it).

[Bryan Rocker]

Went to the Jet site and it lists the DC1200 as a 12" impeller, you can find the specs here....I have the 1200 too.....It works pretty good, but its an older one.

http://www.jettools.com/us/manufactu...product=273504