I want to hang some 1/4" and/or 1/2" corian signage from mailbox posts. I'm having a hard time finding a decent variety of chains and hooks for this. Does someone a good source for this? I looked through Home Depot and Lowes and did find some things that I can prototype with but I wasn't happy with what I could find. I also went into a craft shop (Michael's) and couldn't find anything close there.
I'm going to need to hook into a hole. I was a bit concerned that the stress points may crack so I was considering that a grommet of some sort might provide some strength and possibly add some decorative aspects. I'm sure a bunch of you on this forum have done this so I'd appreciate any advice you can provide. Another thought is to adhere an extra layer of corian on the back for 1/4" but that is a big extra step if I don't have to do it.
Another option I had considered was building a frame for just the top and gluing the sign in and then I could just screw the frame in but this limits me to having a straight edge on the top. I really want to have curves in the sign so this will limit me to hanging for two sided signs. I guess I could use some kind of metal bracket with some curved channels to hold a couple of points.