Well I built it not hard just follow the directions on the sites. Lots of ways to do the pen. I turned a pc. of maple to a form I like,then drilled a 3/8 hole thru the pen. cut a small section off the end and this is what I ended up with. Works well I have about 90 dollars into it. Trying to upload pictures!If you notice I reused the power coard that came with the charger and I also used the cord to the battery connections. I cut off the ends and feed them thru the 3/8 hole in the new handle. Hope this helps some it works very well! It does vaporize the wood! Thanks for all your help! George.
Last edited by George Morris; 08-06-2012 at 8:05 PM.