We decided to go with some LED lights from Lowes that are direct wire. We have existing an outlet above each section of cabinets two of which will end up inside the new cabinets. These outlets are switched with a wall switch we want to use to control the cabinet lights.
What I'm thinking of doing is wiring the fixtures in each section together with 16/3 cord and then running the cord up to those outlets. Everything would be hidden as much as possible between cabinets or in the back corners with plenty of cable clips to keep it neat. I'd use 90-degree plugs for neatness. Anyone see any problems with this?
I also plan t get some lower intensity lighting for above the cabinets which also will need to go to these outlets.
I really don't want to put holes in the drywall for permanent wiring, especially the longest wall which is an exterior wall.